Mondraker Foxy R Parts Documents: Resolve a Bearing Conflict
Mondraker Foxy R parts documents can require a version check before a purchase. The official Foxy drawing headed “SPARE PARTS BIKE 2024” and a later official Foxy spare-parts drawing do not print the same width for one bearing entry. The difference is useful evidence to bring to a dealer; it is not permission to guess which dimension belongs in a particular frame.
Preserve the exact disagreement
In the older drawing, item 12 is written 24×15×5, with reference 3802V-2RS and quantity eight. The later drawing prints 24×15×7 for that entry, retaining the same reference and quantity. Both list Zero Bearing Kit 26 as 099.22101. These conflicting labels should remain attached to their source versions. This article does not decide which printed width is correct or present either as a guaranteed replacement size.
Save the complete document rather than an isolated screenshot of one row. The heading, item number, kit list and surrounding exploded view help a dealer understand what was consulted. Give them the confirmed frame identity and ask for the applicable current parts identification. A similar bearing code in two drawings does not, by itself, resolve contradictory dimensions or confirm what was previously installed.
Kits and numbered items serve different purposes
The diagrams group parts into named kits. Alongside the bearing kit they list Shock Hardware Kit 19, Upper Link Kit 31 and Lower Link Kit 33, each with its own part number. A numbered item in an exploded view is therefore not necessarily an individually orderable retail part. Read the kit contents and ask what the supplied assembly includes before assuming a single bolt or spacer will arrive alone.
The same drawing assigns different torque entries to different fasteners and uses a colour legend for grease, threadlocker or both. That is another reason to retain the complete page. It does not justify copying one torque to every pivot, and this article does not provide a disassembly or bearing-installation procedure. Correct work needs the applicable instructions and competent identification of each component.
Ask a question the supplier can answer
An effective enquiry names the model and frame evidence, identifies item 12 and kit 099.22101, and attaches both conflicting documents. Ask which kit and instructions apply to that frame, whether a revised drawing exists, and what the current kit contains. Keep the response with the service record so the next owner or workshop does not repeat the same unresolved assumption.
The Mondraker information hub and brand-history article explain the wider platform background. They cannot settle this particular dimensional disagreement. The relevant evidence is the actual frame, exact drawings and a specific response about the applicable parts. Do not conceal the older document simply because a newer filename appears more convenient.
Diagram version FAQ
Do both drawings print the same item 12 width?
No. The saved older drawing says 5mm in that dimension, while the later drawing says 7mm.
Does the shared bearing reference settle the conflict?
No. The contradictory printed dimensions still require clarification for the actual frame and replacement kit.
Can one pivot torque be applied to every numbered fastener?
No. The drawings distinguish fasteners and entries; a single copied value would erase that necessary distinction.
Mondraker Foxy R parts documents: keep a useful record
Use Mondraker Foxy R parts documents to prepare a precise identification request, preserving the version conflict. A documented clarification is a more useful outcome than a confident replacement order based on one unexplained row.
Sources
Two exact official Foxy drawings disagree on item 12 bearing width while retaining the same reference. Their kit identities and legends are preserved; the dimensional disagreement is unresolved. Mondraker Foxy spare parts, original 2024 drawing (https://cdn.mondraker.com/storage/resources/faq/65f85b65eab0b742995430-foxy-2024.pdf); Mondraker Foxy spare parts, later drawing (https://cdn.mondraker.com/storage/resources/faq/6ab3a1cbebd91795998690-foxy.pdf). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.