Mondraker Foxy R Suspension Guide: Read the Setup Table
The Mondraker Foxy R suspension guide for 2024 is a model-specific starting document, not a universal tune. It names the Öhlins RXF 36 M.2 29 fork with 160mm travel and an Öhlins TTX Air rear shock. Read the column labels and footnotes before transferring a table value to a setup record, and first confirm that those exact units remain installed.
Notice how the two sides are written
The fork table prints two pressure figures separated by a slash, while the rear-shock table prints one pressure figure. The archive separately lists a ramp chamber among the fork’s features. Do not collapse the fork’s pair into a single guessed value or infer an unexplained chamber order from typography alone. The sheet directs readers to Öhlins recommendations on the casting; obtain the correct unit instructions when the table needs interpretation.
Both sides label damping as clicks out from fully closed, with separate HSC, LSC and LSR columns. Some entries are ranges. These columns are not interchangeable, and a printed range should remain a range in notes. Avoid treating a remembered “ten clicks” as a complete setup description when the control and reference position have been omitted from the conversation.
Keep a visible footnote discrepancy
The sheet’s main title and introductory fork wording describe Enduro application. Under the rear-shock table, however, it says the settings are based on Downhill application and recommends 30–35% sag; the fork footnote suggests 20% sag. That wording difference is present in the actual document. It should be raised with the relevant specialist rather than silently rewritten into a consistent instruction that the source does not provide.
The closing note calls the values general recommendations and says rebound and compression settings should be fine-tuned for riding style and terrain. Accordingly, the table is not a promise that one row will suit every rider or establish a component’s limits. This article deliberately does not prescribe a pressure or a final setting from an ambiguous or incomplete description of a particular bicycle.
Build a useful setup history
Keep the exact document title, the confirmed component models, the applicable row and any resolved manufacturer clarification with a workshop’s setup record. Record changes clearly enough to distinguish the initial recommendation from later adjustments. If the fork or shock has been changed or internally modified, tell the specialist; an archive match on the frame name cannot establish the configuration inside the suspension.
For an explanation of the brand’s broader suspension identity, the Mondraker topic connects to the existing Mondraker guide. Those pages provide background rather than a substitute tune. The practical task here is accurate reading: identify the unit, preserve the table’s labels and resolve unclear wording before treating it as a setting instruction.
Setup table FAQ
Are the fork and shock pressure columns written identically?
No. The fork uses paired pressure figures; the rear-shock table gives a single figure for each listed row.
Does the guide use consistent application wording throughout?
No. Enduro appears in the heading and fork introduction, while the rear footnote explicitly says Downhill application.
Are the printed recommendations a guaranteed final tune?
No. The sheet calls them general recommendations and describes further adjustment for rider style and terrain.
Mondraker Foxy R suspension guide: keep a useful record
Read the Mondraker Foxy R suspension guide as a labelled starting record with a visible wording discrepancy. Clear component identification and appropriate clarification make that record more useful than an isolated pressure or click number.
Sources
The model-specific archive identifies both Öhlins units; the exact setup sheet provides labelled tables and general recommendations, including conflicting Enduro and Downhill wording. Mondraker US 2024 Foxy R archive (https://cdn.mondraker.com/us/en/season-history/detail/15-2024/foxy-r); Mondraker 2024 Foxy R suspension setup (https://cdn.mondraker.com/storage/resources/product_group/file/6641b9f1a44cf732878873-foxy-r-2024-suspension-setup-guide.pdf). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.