Mondraker Foxy R Cockpit Dimensions: Bar, Stem and Fit
Mondraker Foxy R cockpit dimensions describe several separate features of the original handlebar and stem. The United States 2024 archive lists an Onoff Sulfur FG stem, 30mm long at 0°, and an Onoff Sulfur 1.0 handlebar, 800mm wide with 20mm rise. Read those entries as a starting record for this build, not a fitting prescription for every rider.
Keep length, width and clamp diameter distinct
The stem is described as forged 6061 alloy with a 31.8mm bar bore. The bar is double-butted 6061 alloy and also lists a 31.8mm bar bore. These figures describe an original connection, while 30mm refers to the listed stem length and 800mm to bar width. A request that quotes only one of these numbers leaves a supplier guessing which measurement is intended.
The handlebar entry also gives 9° backsweep and 5° upsweep. Keep those angles with the named bar when comparing the original cockpit to what is fitted now. A replacement described only as “800mm” may differ in other ways, and a similar silhouette in a photograph does not establish its markings or condition. Record the actual component labels before making a purchase decision.
A used bar may no longer match the table
The archive cannot establish whether an owner has shortened or replaced a handlebar. Measure and identify the current arrangement through an appropriate assessment rather than assuming its width from the model name. Ask for the history of any changes and keep a claimed original component separate from a confirmed measurement. A component that once matched the factory build can still need attention after use or an impact.
The catalogue width is not an instruction to cut a bar, and it does not supply a universal minimum width or cutting procedure. Nor does the listed stem angle establish a particular rider’s preferred hand position. A fitting conversation should address the rider’s needs and the actual bicycle while respecting the relevant component instructions. Avoid irreversible changes merely to reproduce someone else’s setup photograph.
Describe the fitting concern clearly
Tell the fitter what is difficult: hand position, access to controls or a feeling of excessive reach are different observations. Provide the confirmed frame size, actual bar and stem labels and known modifications. The archive also lists Onoff Twin one-lock-on grips at 135mm; that is another original component entry, not a measurement that can be subtracted from width to derive a personalised cutting recommendation.
The Mondraker topic index and existing brand introduction give context for Forward Geometry. The name alone does not decide a rider’s cockpit adjustment. Keep the fitting discussion grounded in the installed parts and a checked position, and ask for compatible options before buying a stem or handlebar solely because one nominal dimension agrees.
Cockpit specification FAQ
Is 31.8mm the listed stem length?
No. It is the bar-bore designation; the archive separately records a 30mm stem length.
Does an 800mm archive width prove a used bar is uncut?
No. The actual component and any modification history must be checked on the bicycle being considered.
Does the catalogue prescribe a suitable width for every rider?
No. It records original equipment; an individual fitting decision requires the rider and actual bicycle together.
Mondraker Foxy R cockpit dimensions: keep a useful record
Mondraker Foxy R cockpit dimensions are most useful when width, rise, angles, stem length and clamp information remain distinct. Combine that record with an assessment of the current setup so a fitting enquiry starts from evidence rather than a single attractive number.
Sources
The archive distinguishes stem length and clamp designation from handlebar width, rise and angles. These are original equipment fields, not individual fitting instructions. Mondraker US 2024 Foxy R archive (https://cdn.mondraker.com/us/en/season-history/detail/15-2024/foxy-r). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.