Mondraker Foxy R Dropper Record: Diameter, Size and Travel
A Mondraker Foxy R dropper record should preserve the difference between post diameter and the size-dependent figures in the catalogue. The United States 2024 entry lists an internally routed Onoff Pija dropper, 31.6mm diameter, with a 1X remote lever. Before shopping for a replacement, identify the frame size and the post actually installed; an archived specification cannot confirm a later owner’s changes.
Copy the size-dependent entries faithfully
Mondraker prints S: 405×95–125mm, M: 458×120–150mm, L: 498×140–170mm and XL: 558×170–200mm. Keep the relevant complete entry in an enquiry rather than shortening every model to one maximum number. The post’s 31.6mm diameter is a different measurement, so a match on that dimension alone does not establish that the full assembly will suit the rider or frame.
The table’s compact notation is not an installation drawing. It does not provide a safe exposed-post length or a frame-specific maximum insertion depth. Nor should the difference between two printed numbers be used to invent either value. Ask for the correct post instructions and a frame clearance check when those measurements affect the decision. Record which quantity a workshop has actually measured.
Fit depends on the bicycle and rider together
An owner looking for more drop needs more information than the original catalogue range. The required saddle position, available insertion and installed routing all matter to a proposed change. These need assessment on the actual bicycle. Do not push a post farther into a frame to “test” an assumed catalogue calculation, and do not treat a larger size’s listed post as a universal upgrade for a smaller frame.
The archive also names an SDG BEL-AIR 3.0 saddle with steel rails. A saddle and post are related components, but the saddle name does not determine the post’s insertion limits or remote compatibility. Include photographs of the installed post markings and remote in the enquiry, especially when the bicycle’s service history suggests parts have been exchanged. Keep an unverified post model labelled as unverified.
Make the replacement request specific
Describe the problem before requesting a new part: insufficient movement range, a remote fault and a seating-position concern are not the same issue. Supply the confirmed frame identity, size, existing post name and any legible dimensional markings. Ask the workshop to separate a repair assessment from a recommendation for a different post, rather than assuming replacement is the only useful outcome.
More general information sits on the Mondraker topic page, and the Mondraker brand guide explains its off-road range. Neither page supplies an individual saddle setting. For this task, a measured fit and a clear component record are more useful than transferring another rider’s preferred drop or copying a photograph of a similar frame.
Pija dropper FAQ
Does 31.6mm tell me how far the post can be inserted?
No. It is the listed diameter; insertion limits require the actual frame and post information.
Are all four sizes listed with the same post entry?
No. Mondraker gives four different size-dependent entries, so preserve the one associated with the confirmed frame size.
Can an archived post range prescribe saddle height?
No. Saddle position must be assessed for the rider on the actual bicycle, within the relevant component limits.
Mondraker Foxy R dropper record: keep a useful record
The useful Mondraker Foxy R dropper record combines the exact diameter, full size entry and present component identity. It supports a focused workshop conversation without pretending that a catalogue row supplies every measurement needed for a replacement.
Sources
The manufacturer records a 31.6mm Pija post and four size-dependent entries. Insertion depth and an individual saddle position are not supplied. Mondraker US 2024 Foxy R archive (https://cdn.mondraker.com/us/en/season-history/detail/15-2024/foxy-r). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.