Mondraker Foxy R Shock Dimensions: Read Every Interface
Mondraker Foxy R shock dimensions require more than the first number in a product listing. For the United States 2024 alloy Foxy R, Mondraker records an Öhlins TTX Air 205×65mm shock, trunnion top mount and 25×8mm bottom bushings. Those are separate pieces of a model-specific description. Collect the complete record before discussing a replacement with a suspension specialist.
Distinguish the shock from wheel travel
The same archive gives the frame 150mm rear travel and the fork 160mm travel. Neither figure replaces the rear shock’s 205×65mm designation. Mixing these entries can send an enquiry towards a shock with an inappropriate size or mounting arrangement, even when the advertised travel number sounds familiar. Copy the shock line exactly and label it as a shock specification.
The archive also identifies high-speed compression with a climb-mode lever, low-speed compression, rebound and air preload. Its separate shock-settings field reads C20 compression and R35 rebound. Do not turn those codes into a claimed number of external adjustment clicks: the archive does not explain them that way. A component label and the appropriate instructions are needed to resolve the actual unit in front of you.
Mounting hardware is part of the question
A trunnion top mount and a lower bushing entry describe different ends of the assembly. Quoting only “205×65” omits information that the manufacturer deliberately lists. Photograph the existing mounting arrangement without dismantling it merely for an advertisement, and ask the specialist to confirm which hardware would accompany a proposed unit. A shock being advertised at the same nominal size is not complete compatibility approval.
Keep any replacement history with that enquiry. A previous owner may have changed the shock, so the archive and the installed unit can disagree without either photograph being fabricated. The useful response is to identify the frame and the fitted shock, then resolve the difference. Avoid selecting hardware from a similar-looking carbon model or assuming that a visibly close spacer is equivalent.
Prepare a precise service conversation
Give the workshop the model and season, the full shock description, clear labels and the reason for the enquiry. A damaged mount, an air-loss complaint and a planned replacement call for different assessments. This article does not provide disassembly, pressure-release or fastener instructions. Those operations require the relevant procedures and a competent person, rather than dimensions extracted from a sales archive.
The Mondraker overview groups the brand’s content, while the existing brand introduction places Zero Suspension in context. That background can help explain the name, but it does not establish clearances or hardware for an alternative shock. Ask for a specific fit confirmation before spending money on a unit that merely resembles the documented original.
Rear shock FAQ
Is 150mm the shock’s listed length?
No. It is the frame’s rear travel in this archive; the shock is separately designated 205×65mm.
Can matching the two shock numbers settle compatibility?
No. Mounting type, hardware, frame clearance and the proposed unit still need an appropriate compatibility assessment.
Are C20 and R35 universal adjustment instructions?
No. They are printed archive settings codes, not an explained click-count procedure for every TTX Air unit.
Mondraker Foxy R shock dimensions: keep a useful record
Use Mondraker Foxy R shock dimensions as a complete identification record, including both mounts and the actual component label. This makes a replacement or service enquiry clearer while leaving final compatibility and work instructions with the relevant specialist.
Sources
The exact 2024 Foxy R entry separates rear travel, fork travel, shock dimensions, mounts and unexplained settings codes. No alternative shock is approved here. Mondraker US 2024 Foxy R archive (https://cdn.mondraker.com/us/en/season-history/detail/15-2024/foxy-r). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.