Mondraker Foxy R Brake Rotor Record: Front and Rear Differ
The Mondraker Foxy R brake rotor record is deliberately different at the front and rear. In the manufacturer’s United States 2024 archive, SRAM Code Bronze Stealth four-piston calipers accompany a 200mm front Centerline rotor and a 180mm rear Centerline rotor. Treat that as an original-build reference, then inspect the actual fitted parts before requesting maintenance or replacements.
Preserve the axle-end distinction
Both rotor descriptions say IS six bolts and one-piece rotor. These words belong alongside the diameter and location in a useful parts record. A note saying only “Code brakes” leaves out the difference between the two ends, while a note saying only “200mm rotor” could be incorrectly applied to the rear. Photograph the front and rear separately and label the images when seeking advice.
The archive describes steel-backed organic pads and Code Bronze Stealth levers with SwingLink, lever pivot bushings and tool-free reach adjustment. These are specification fields, not a diagnosis of a used brake. Pads, rotors and levers may have been replaced independently. Their current identity and condition need checking even when the caliper still bears the same name as the catalogue.
Original equipment is not a maximum limit
A listed 200mm front rotor does not, by itself, declare the largest permitted front rotor. Likewise, the 180mm rear entry is not an instruction to fit a larger disc with an assumed adapter. The archive does not resolve every frame, fork, caliper and mounting requirement for a change. Obtain the applicable compatibility information before buying a different arrangement or treating a diameter increase as an automatic improvement.
When a seller advertises an “upgraded” brake, ask what changed. The answer should distinguish the caliper, lever, rotor and adapter rather than grouping them into one vague description. Keep any supporting workshop record with the bicycle’s details. A changed rotor need not make a frame misidentified, but it does mean the archive no longer describes that part of the current build.
Turn a symptom into a clear enquiry
Report whether the concern is at the front, rear or both, and describe what happens without declaring its cause from a photograph. Include component labels and the known maintenance history. Do not infer rotor thickness limits, pad compatibility, fluid type or tightening values from the catalogue’s diameter field. The correct procedures and actual measurements must come from relevant brake instructions and a competent assessment.
The broader Mondraker collection and its brand introduction provide context for this Enduro model. For braking work, keep the conversation anchored to the actual parts. An original specification can help a mechanic understand the starting build, but it cannot certify braking performance or present condition on a bicycle that has already been ridden.
Brake specification FAQ
Does the archive list equal front and rear rotors?
No. The documented original sizes are 200mm front and 180mm rear for this particular 2024 Foxy R entry.
Does the six-bolt description prove any rotor will fit?
No. It identifies one interface; the full proposed rotor and brake arrangement still needs a compatibility check.
Is the original rotor diameter a maximum-size approval?
No. The archive provides the build specification, not a complete set of permitted modification limits.
Mondraker Foxy R brake rotor record: keep a useful record
A Mondraker Foxy R brake rotor record is most useful when each end has its own identity, diameter and mounting description. Add confirmed changes and workshop findings rather than allowing a catalogue match to stand in for an inspection.
Sources
The 2024 Foxy R brake fields distinguish Code Bronze Stealth equipment, front and rear rotor sizes and six-bolt connections. Modification limits are not inferred. Mondraker US 2024 Foxy R archive (https://cdn.mondraker.com/us/en/season-history/detail/15-2024/foxy-r). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.