Mondraker Foxy R Tyre Specification: Read Front and Rear
The Mondraker Foxy R tyre specification describes a different original tyre at each end. The manufacturer’s United States 2024 archive lists a Maxxis Minion DHF 29×2.5 WT front tyre and a Maxxis Aggressor 29×2.3 rear tyre. A useful replacement enquiry preserves the model, location and additional construction details rather than reducing both entries to “29-inch Maxxis”.
Record the complete front entry
The listed Minion DHF has a folding bead, tubeless-ready designation, 3C MAXX TERRA compound, EXO+ protection and 120TPI. These are part of the archived front tyre description. Copy them as labelled fields if trying to identify the original specification. Do not assume that another tyre with the same tread name carries the same compound or casing simply because a photograph looks similar.
For a used bicycle, read the actual sidewall on both sides where practical. Its markings can establish what is installed more reliably than an old listing or a seller’s memory. Note any difference from the archive without silently “correcting” the bicycle to match it. A replacement tyre may be an intentional change; its suitability and condition still need their own assessment.
Keep the rear construction distinct
The Aggressor entry specifies a folding bead, tubeless ready, dual compound, EXO protection and 60TPI. The rear line does not repeat the front tyre’s EXO+ or 120TPI wording. Combining the two descriptions into a single generic specification would therefore lose a real distinction. Mark the location beside every saved sidewall photograph and quote the rear description separately in a purchase request.
The archive also lists 30mm internal-width hookless LG1 Enduro rims. That connects the tyre enquiry with the original rim record, but it does not approve every tyre bearing the same nominal diameter. Check the intended tyre and actual rim combination against relevant manufacturer information. The catalogue supplies no universal pressure, so avoid treating a number from another rider as a documented setting for this setup.
Ask for the outcome you actually need
An owner seeking the original build has a different question from someone choosing a tyre for changed conditions. Tell the workshop which task you mean, identify the present rim and tyre, and describe the intended riding. This article does not claim to have tested alternative tread patterns, measured their grip or ranked them. Those claims would require evidence beyond the original specification table.
Use the Mondraker content hub for related brand reading and the existing Mondraker introduction for the wider off-road story. For a tyre decision, the most useful next step is a clearly labelled current sidewall record. It lets a supplier distinguish an exact replacement request from a request to assess a different construction.
Tyre identification FAQ
Are both original tyres listed with the same casing?
No. The front lists EXO+ and 120TPI, while the rear lists EXO and 60TPI in this archive.
Does this specification provide a universal tyre pressure?
No. The archived tyre fields do not prescribe one pressure for every rider, rim or riding situation.
Does a matching tread name establish an exact replacement?
No. Size, construction and compatibility information must also be checked for the actual product and wheel.
Mondraker Foxy R tyre specification: keep a useful record
An accurate Mondraker Foxy R tyre specification keeps front and rear descriptions intact and distinguishes the archive from the installed bicycle. That gives a replacement discussion a clear starting point without making unsupported performance or pressure claims.
Sources
The named front and rear tyre entries differ in model, size, compound and casing. The rim entry is separate; no pressure or tested performance is claimed. Mondraker US 2024 Foxy R archive (https://cdn.mondraker.com/us/en/season-history/detail/15-2024/foxy-r). Retrieved and read 27 October 2026.
Photograph credits and permissions
Photograph 1
Original title: MondrakerKaiser.jpg
Creator: Carlos Delgado; CC-BY-SA; creator URI: http://commons.wikimedia.org/wiki/User:Kadellar
Original source URI: https://commons.wikimedia.org/wiki/File:MondrakerKaiser.jpg
License / permission: CC BY-SA 3.0
License / permission URI: https://creativecommons.org/licenses/by-sa/3.0/
Modification notice: Wikimedia-provided 1280 × 960 downscaled JPEG. No crop or further image edits by this publisher.