Bergamont Grandurance 8 Gearing: What the 40T and 11–42T Numbers Mean
Bergamont Grandurance 8 gearing is listed as a single 40-tooth chainring with an 11–42-tooth cassette on the inspected model 291088. Dividing chainring teeth by rear-sprocket teeth gives approximately 0.95 in the lowest combination and 3.64 in the highest. Those ratios are more informative than the eleven-speed label alone.
Bergamont Grandurance 8 gearing: read the two ends
The official specification names an FC-RX600 crank, an RD-RX812 rear derailleur and an SLX CS-M7000 cassette. Keep that original component record separate from what is installed on a used bicycle. A chainring or cassette may have been changed while the frame still carries the same model name.
The ratio calculation describes a mechanical relationship. It does not measure effort on a hill, ground speed at an unspecified cadence or the distance covered by a wheel whose effective circumference has not been established. This reference reports no climbing trial.
Compare tooth counts rather than speed counts
The inspected Sweep 4 EQ, model 291036, offers a useful contrasting Bergamont example: 50/34 chainrings and an 11–34 cassette. Its lowest listed combination is 34 divided by 34, or 1.00. The Grandurance example’s 40 divided by 42 is slightly lower despite having fewer nominal gear combinations.
This comparison does not decide which bicycle climbs better for a particular person. It shows why counting eleven versus sixteen advertised combinations cannot answer the gearing question. Load, riding position and the complete bicycle also belong in a practical choice.
Describe what you need to change
If the existing bicycle feels overgeared, note the fitted tooth counts, the terrain and which end of the range causes difficulty. A wish for a lower climbing gear differs from a wish for more closely spaced shifts. Give a mechanic that description before requesting a new cassette.
Any proposed change needs the drivetrain’s complete compatibility checked. The original list is not permission to fit a larger cassette, reuse an uncertain chain or assume every component carrying a GRX label is interchangeable. Keep the approved replacement specification with the bicycle’s records.
The historical Prime Team Carbon photograph shows another Bergamont road build. Its visible drivetrain is not the source of these Grandurance numbers and cannot establish what is fitted to an individual model 291088 today.
FAQ
What is the lowest calculated ratio here?
Forty divided by forty-two is approximately 0.95.
Does eleven-speed tell me how low the gearing goes?
No. The chainring and cassette tooth counts are needed.
Do these figures approve a larger replacement cassette?
No. The complete drivetrain needs a specific compatibility assessment.
Use Bergamont Grandurance 8 gearing as a documented starting point for a real build. The Bergamont reference topic connects related equipment questions, while the brand introduction explains the wider range.
Primary documents: Primary source 1 (https://www.bergamont.com/gb/en/product/bergamont-grandurance-8); Primary source 2 (https://www.bergamont.com/global/en/product/bergamont-sweep-4-eq).
Photograph credits and permissions
Photograph 1
Original title: Bergamont Prime Team Carbon.jpg
Creator: Landirenzo-7er; source-supplied author URI: https://commons.wikimedia.org/w/index.php?title=User:Landirenzo-7er&action=edit&redlink=1
Original source URI: https://commons.wikimedia.org/wiki/File:Bergamont_Prime_Team_Carbon.jpg
License / permission: CC BY-SA 4.0 International
License / permission URI: https://creativecommons.org/licenses/by-sa/4.0/
Modification notice: Downloaded original JPEG bytes and embedded metadata unchanged; no crop or re-encoding.