Addmotor Greattan Dimensions: Check Rider Fit and Storage Access

Addmotor Greattan dimensions matter before the first ride because a trike must reach its parking place every day. A doorway that looks generous from the pavement may become awkward once a door leaf, threshold and tight turn enter the picture. Measure the whole access route before comparing colours or range.

Use the Addmotor Greattan dimensions as a starting envelope

The official measurement table lists total length at 75.79 inches and total width at 32.68 inches. Treat these as reference dimensions for the described configuration. Ask the supplier to confirm the dimensions of the exact version, especially if accessories extend beyond the frame or baskets.

Measure the clear doorway opening with the door in its normal open position. Then examine the approach: a straight opening and a right-angle corridor are different problems. Lay out a rectangle on the floor using removable tape and check where the front wheel, rear wheels and handlebar would need to move.

Rider access deserves a separate check

Addmotor gives a suggested rider-height range of 5 feet 4 inches to 6 feet 4 inches and a standover figure of 17.32 inches. These numbers do not establish an individual's reach, comfortable knee movement or ability to step through while controlling the trike.

At an appointment, wear your usual riding shoes and try mounting and dismounting with staff assistance before riding. Check whether the brake levers, handlebar and saddle can be adjusted appropriately within the manufacturer's limits. Avoid treating the backrest as a substitute for a fitting session.

Trace the last few metres home

Include gates, ramps, lift doors, the space beside a parked car and the final turn into storage. A nominally adequate opening can still be difficult if there is nowhere to stand while guiding the trike. Consider the practical task of unlocking a door and securing it open.

Ask who will move the trike when you are tired or it needs service. Do not design storage around lifting it unless appropriate equipment and a verified handling plan exist. The Addmotor test-ride comparison gives a useful appointment structure, while the brand topic collects related reference material.

Space and fit FAQ

Is a doorway wider than the quoted width automatically suitable?

No. The approach angle, door hardware, accessories and space to manoeuvre still need checking.

Does being inside the height range guarantee fit?

No. It is a screening guide; individual reach and control require a practical assessment.

Can I measure the historical photo to confirm a current version?

No. Perspective and an unconfirmed variant make a photograph unsuitable for deriving exact dimensions.

The useful outcome of checking Addmotor Greattan dimensions is a measured access route and a fit assessment, with any awkward corner resolved before delivery.

Manufacturer references: Greattan specifications.